CC Leader - distributor of chemical raw materials
Moscow region, Staraya Kupavna, st. Dorozhnaya 16a
Nizhny Novgorod Region, Dzerzhinsk, Avtozavodskoe shosse, building 1, TMK
Styrene-acrylic dispersion Novadisp 1705
В наличии
Composition:
Anionic water dispersion of styrene-acrylic copolymer. APEO/MIT – free
Usage:
Designed for the production of waterproofing mastics, sealants, interior paints, masonry coatings, plaster, putty. Ideal for soft primers. It has elasticity, compatibility with Portland cement, and can be used as a binder to increase elasticity. Thickens with all types of thickeners.
Description:
Specification:
| Appearance | Milk-colored liquid |
| Mass fraction of non-volatile substances,%, ISO 1148 | 49 – 51 |
| Brookfield viscosity (2/30), MPa * s, ISO 3219 | 500 – 1500 |
| MTP, °C, ISO 2115 | 5 |
| pH, ISO 1148 | 7 – 9 |
| Average particle size, nm | 100 |
| Water absorption of free films,%, max | 7 |
| Residual content of monomers, % max, | 0,03 |
| Tensile strength, MPa | 2 - 4 |
| Elongation at break, % | 1300 - 1800 |
| Stabilization | Anionic acid |
Storage and recommendations:
In unopened original packaging, it can be stored for up to 12 months at a temperature of 10-25 C. Do not allow freezing and storage at temperatures above 40C. It is recommended to add preservatives in the manufacture of products based on NOVADISP®-1705 to protect them from damage by microorganisms, since the amount of biocide is sufficient only for guaranteed storage of the dispersion
Technical support:
Experienced salesmen and technical consultants of the company are ready to give advice and support during laboratory tests and take part in factory tests.
Thank you for your application!
Our employee will contact you as soon as possible
